Valve block
Air suspension solenoid valve blocks are responsible for distributing air from the compressor to air struts or air springs.
It is controlled by signal from ECU. Electricity generates electromagnetic field to close and open the valve hoses.
Valve blocks from RXAirtech are:
- Designed and manufactured to meet or exceed OE
- Restore original air suspension system
- highly regulated and managed quality system based on German quality standard.
From RXAirTech: The winding and welding are required to be neat, which ensures the stability of voltage resistance.
From Average competitors: The winding is scattered, the resistance is unstable, sometimes even with no resistance.
From RXAirTech: The spool requires the welding seam to be uniform and neat, and the opening and closing rate is stable. There will be no air leakage.
From Average competitors: If the valve core is not welded, there will be problems such as air leakage and unstable air flow.
From RXAirTech: The rubber surface has been further improved. The surface is flat, smooth, dust-free, bubble-free.
From Average competitors: Spilled glue, bubbles, dust, unevenness
The sensor uses air medium, and the measurement accuracy can reach 1.5% FS. Its stability, working temperature, sensitivity coefficient, overload pressure, response time, output signal, shock resistance, and impact resistance are all better than other companies.
Error code from ECU:
Causes breakdown in the car, dangerous to drive
Insufficient rubber surface hardness:
Problems such as air leakage may occur, causing the air suspension to fail to work properly.
Can not meet the high and low temperature standards:
Under high and low temperature, the rubber surface will be damaged, causing damage to the internal parts and failing to work normally
Abnormal noise:
Affect driving experience